SAE 5W–30 is the best viscosity grade for the vehicle. Do not use other viscosity grade oils such as SAE 10W–30, 10W–40, or 20W–50.
If in an area of extreme cold, where the temperature falls below −20°F (−29°C), an SAE 0W–30 oil should be used. An oil of this viscosity grade will provide easier cold starting for the engine at extremely low temperatures.
When selecting an oil of the appropriate viscosity grade, always select an oil that meets the dexos1 specification or equivalent. See “Specification” for more information.
The vehicle must be on a level surface when checking the coolant level. Check to see if coolant is visible in the coolant surge tank. If the coolant inside the coolant surge tank is boiling, do not ...
Refer to the replacement number shown on the original battery label when a new battery is needed. See Engine Compartment Overview for battery location. WARNING Battery posts, terminals, and r ...
Radio Frequency Statement
This vehicle has systems that operate on a radio frequency that comply with Part 15 of the Federal Communications Commission (FCC) rules and with Industry Canada Standards RSS-GEN/210/220/310. Op ...